From LouisKatz

Main: KilnController

http://www.megunolink.com/malt-kiln/

have to change the html codes to ASCII in the program. have to make sure that the includes are correct. have to download the libraries. Probably have to change from the Liquid Crystal Display library and coding.

Yes, Thanks! Glad to see an implimentation of PID. That makes the whole thing much more reasonable. It needs changing from a thermistor to a pyrometer. ladyada I sells a type K thermocouple board. http://www.adafruit.com/products/269 I have one of these.

If I were going to build one, and it is on my list I would want a type R thermocouple. It should be possible to use the board and just replace the chip. The Chip is available here http://www.maximintegrated.com/.../sensors.../MAX31855.html

Me,I also a real time clock http://www.adafruit.com/products/264

PID http://playground.arduino.cc/Code/PIDLibrary

Retrieved from https://www.louiskatz.net/w/pmwiki.php?n=Main.KilnController
Page last modified on March 25, 2015, at 10:25 AM