• View
• Edit
• History
• Print

PurchaseList201601

Order #2

1. N Channel MOSFET https://www.adafruit.com/product/355

• "A BUZ-71 " will work. https://www.youtube.com/watch?v=Lzxuro0Z2Ew
• http://www.hobbytronics.co.uk/arduino-tutorial9-power 95N2LH5 N-Channel Power MOSFET

To Order

Audio recorders like: http://www.amazon.com/Voice-Recording-Playback-Module-Loudspeaker/dp/B010ND0KDK/ref=sr_1_13?s=electronics&ie=UTF8&qid=1449413260&sr=1-13

IN TOWN

• Batteries
• rosin flux
• cement board

Jameco

• LED 's
• Switches
• Serial LCD Jameco 2081975
• Cheap Push Button Switches (2 per student)@$.35 might not need http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_149948_-1
• Light Dependent Resistor Might not need
• Rotary Encoder 776386 $1.19
• Speaker Piezo
• 100 microfarad Electrolytic $.12
• .1 microfarad ceramic $.12
• 10 microfarad electrolytic capacitor
• 500 Ohm Potentiaometer $1.25 a few
• 4-AA Battery Holder with Snaps 2 batteries long $.99
• Battery Holder 4 Inch AA Inch PC Connector Wire Lead 6 Inch Double Back$0.79
• 4xAA Battery Holder with Cover and Switch$0.149
• 9V Battery Snap with 6 Inch 26AWG Leads
• desoldering braid
• Solder iron cleaner pads
• 2 position screw down
• 10 position block
• TIP102 NPN Darlington Transistor
• 1n4001 Diodes

Mouser

• Mouser sourced plugs

Banana Robotics

• Banana Robotics Sonic Distance Sensor HC-SR04 Library is here https://bitbucket.org/teckel12/arduino-new-ping/wiki/Home
• Servo
• Yellow Wheel get extras
• Gear Motor
• 9110 Driver
• http://www.gearbest.com/other-accessories/pp_227263.html?currency=USD&gclid=CJ2I_PnUysgCFQobaQod7QEN1A ??
• https://www.bananarobotics.com/shop/Connectors/9V-Battery-Snap-Connector-with-Power-Plug
• Battery Packs 6V AA
• Batteries
• LEDS
• Leads
• iron
• hex nuts, screws etc for mounting Arduino
• extruderSmart
• bits for Xcarve
• Drill Bit Blank for tapered tools.

FYI Starter Kit Contains

1. Arduino Uno w/Atmega328 - The latest and greatest Arduino revision, assembled and ready to go, including 4 rubber feet
2. 3' USB cable - Perfect for connecting your Arduino to a computer
3. Protoshield Kit - New! As of 08/25/14, the Starter Pack now includes the latest version R3 of the ProtoShield?.
4. Tiny Breadboard - Fits on top of the protoshield, easy to use
5. 9V DC regulated wall adapter - You can power your Arduino from any wall socket. This switching regulator is efficient and small and works with US (110V) and European (220V) power.
6. 9V Battery case with switch and a 2.1mm plug- so you can power your arduino using a 9V battery. This case is much sturdier than just a battery clip and it has an on/off switch too! Note that this comes unassembled
7. 10K potentiometer,
8. 1K potentiometer,
9. 2 small pushbuttons,
10. 5 red diffused bright LEDs,
11. one each of red, green and blue ultra-bright LED,
12. 5 100 ohm resistors,
13. 5 1K resistors,
14. 5 10K resistors, and a
15. CdS photocell sensor.
16. Also includes 65 flexible breadboard wires in 8 colors, perfect for use with the solderless breadboard.

Grainger

• 1/8 1/16 end mill